OUR MUD CAT™ AUGER SPECIFICATIONS MODEL SP-810

This is the perfect hydraulic dredge for marinas as it can manuvuer into tight spaces and produces no turbidity. MudCat dredges have been approved by the Army Corps of Engineers and most state environmental agencies as the prefererred machine to use for hydraulic dredging due to the fact that no turbidity (suspended dredge spoils) are created during the dredging process, thereby keeping the water clean and containing the dredge material within the dredging system, this aspect is particularly important to marinas that are part of the USA EPAClean Marina Program.

GENERAL SPECIFICATIONS
Length (O.A.)	28 ft 6 in (8.68 m)
Width (O.A.)	8 ft 0 in (2.44 m)
Height (O.A.)	9 ft  (2.85 m)
Weight	15,500 lbs (7030 kg) dry
Draft	25 in (0.64 m)
CUTTER SPECIFICATIONS
Auger Diameter	14 in (350 mm)
Auger Pitch	11 in (279 mm)
Cutter Knives	Detachable Heat-Treated Blades
Max. Cutter Depth	12 ft (3.65 m) Maximum
CAPACITY SPECIFICATIONS
Impeller Diameter	12 in (305 mm)
Suction Diameter	8 in (203 mm)
Discharge Diameter	8 in (203 mm)
Dredged Material Output	40 to 90 cubic yards per hour
Average Cutting Speed	8 to 12 FPM (2.44 to 3.66 m/min)

Available By The Job - Please Contact Us To Quote and Engineer Your Job
FREE Dredging Permit Paperwork Preparation

 

Depending on Your Job Location and the Type of Dredge Spoils That You May Have,
We Can Also Haul Them Away for You for At Cost -
Please Contact Us For More Information